Linux_post_install/DOC/howto/network.md

How-To: pos network

Networking day-to-day: IP/diagnostic info, Wi-Fi hotspots, host discovery, port checks, and the aria2 download daemon. Tools: ip, hotspot, scan, checkport, download.

Tool	What it does
pos network ip	Interfaces, default route, public IP + location
pos network hotspot	Wi-Fi AP via create_ap / wihotspot-gui
pos network scan	Two-phase host discovery with nmap
pos network checkport	Is a TCP port open on a host?
pos network download	aria2 download daemon + queue control (add/torrent/metalink, watch, limits)

---

pos network ip — where am I, what's my IP

pos network ip

Shows local interfaces + addresses, the default route, and your public IP with its geolocation. Useful before ssh-ing home or opening ports.

Recipe: public IP on the go — this is the same value the health digest includes, so if your home IP changed you'll see it in the 08:00 report.

Troubleshooting: the public-IP lookup needs outbound HTTPS; if it prints "unreachable"/location unknown, your network or a firewall is blocking api.ipify.org / the geo provider.

---

pos network hotspot — turn the machine into a Wi-Fi AP

Requires the precompiled create_ap + wihotspot-gui binaries shipped in x64_bin/ (or arm64_bin/) and installed to /usr/local/bin by install.sh. The GUI needs a desktop session; the CLI needs a wireless NIC in AP mode.

pos network hotspot                       # launch the wihotspot-gui
pos network hotspot start wlan0 eth0 MyNet mypass      # AP on wlan0, internet via eth0
pos network hotspot start --foreground wlan0 eth0 MyNet mypass   # block until Ctrl+C
pos network hotspot stop                  # stop the running AP (auto-detected)
pos network hotspot stop wlan0            # stop by interface/PID
pos network hotspot status                # list running APs

Positional args: <wifi-iface> [<internet-iface>] <ssid> [<passphrase>]. Without --foreground, it asks whether to run in the background; daemonized APs log to /var/log/linux_post_install_hotspot.log.

Recipes:

• Give guests internet while tethered: pos network hotspot start wlan0 eth0 GuestNet secret.
• After starting, find who joined with pos network scan 192.168.42.0/24 (create_ap default subnet) or pos network checkport <phone-ip>:80.

Troubleshooting:

• create_ap not found → the precompiled binary wasn't installed; re-run ./install.sh (Phase 2 copies x64_bin/ → /usr/local/bin).
• "No suitable AP mode" → your Wi-Fi card/driver doesn't support AP mode; use the GUI (wihotspot-gui) or a USB dongle.
• Client has IP but no internet → check the <internet-iface> arg / NAT forwarding; create_ap --daemon logs to the hotspot logfile.

---

pos network scan — find hosts on the LAN

Requires nmap (sudo apt install nmap).

pos network scan 192.168.1.0/24          # fast discovery
pos network scan 10.0.0.0/28 --full      # + OS, ports, services, NSE scripts
pos network scan 172.1.1.104             # single host
pos network scan 192.168.1.0/24 --retries 3

Two phases: fast ping-sweep discovery, then — only with --full — a detailed metadata scan on the alive hosts.

Recipe: after pos network hotspot start, find attached clients: pos network scan 192.168.42.0/24.

Troubleshooting: nmap missing → install it. Scanning a remote/hostile network without permission is not advisable; --full is slow — scope it to a /24 or a single host.

---

pos network checkport — is a port open?

pos network checkport 192.168.1.1:80
pos network checkport 10.0.0.5:443

Exits non-zero if the port is closed/unreachable, so you can chain it:

Recipe: confirm a self-hosted service is up before alerting:

pos network checkport jellyfin.local:8096 && notify_send "Jellyfin reachable" \
  || notify_send "Jellyfin DOWN"

(see communication for notify_send).

Troubleshooting: a "closed" answer from a host that is up usually means a local firewall — check sudo pos system firewall rules and service binds (ss -tlnp).

---

pos network download — aria2 download daemon + queue

Runs a persistent aria2c JSON-RPC daemon as a systemd user service (pos-aria2.service, enabled via systemctl --user enable --now; a linger warning is printed when no session is active, so the daemon survives logout). The RPC secret lives in ~/.config/linux_post_install/download.env (chmod 600). Downloads land in ~/Downloads by default.

# enqueue one or many files (auto-starts the daemon if needed)
pos network download add https://example.com/ubuntu.iso
pos network download add https://example.com/a.bin https://example.com/b.bin --dir /mnt/hdd/dl

# torrents / magnets — keep seeding with --seed (default: stop at 100%)
pos network download torrent debian.torrent --seed
pos network download torrent "magnet:?xt=urn:btih:…"

# watch progress live (Ctrl+C detaches); with a GID it exits when that one finishes
pos network download watch
pos network download watch a1b2c3d4e5f60718

# the queue
pos network download list
pos network download pause a1b2c3d4e5f60718     # resume / remove work the same
pos network download remove --force all          # kill everything immediately
pos network download limit 2M                    # global speed cap (0 = unlimited)
pos network download move a1b2c3d4e5f60718 0     # jump to the front of the queue

Recipe: grab a big ISO in the background and keep an eye on it from a terminal:

pos network download add https://example.com/ubuntu.iso --tmux
tmux attach -t dl-ubuntu.iso      # live progress; session closes itself when done

--tmux opens a detached dl-<name> session running watch <gid> (name from --out or the URL basename, sanitized; -2 suffix on collision).

Troubleshooting: "RPC failed — is the daemon running?" → pos network download status; if the unit failed, check the journal with journalctl --user -u pos-aria2 -n 50. Seed/limit knobs live on add/torrent (--seed, --split) and on limit/set for the running queue.

Recipe: survive a long internet outage. A download that fails while the internet is down is stopped with error status — the retry machinery brings it back without you:

pos network download add https://example.com/big.iso   # arms the retry healer
# ...router dies for 3 hours; big.iso sits in STOPPED/error...
pos network download retry all          # waits for connectivity, re-queues, verifies
pos network download watch 2e9dffc4     # or: watch a live one — auto-restarts when back

The healer timer (pos-aria2-retry.timer) already runs retry all every 2 min on its own once a download started, so no shell is needed on headless boxes. retry <gid> for one download; sources that fail with a real 404/410 are remembered in ~/.config/linux_post_install/download.retry and skipped by retry all — pos network download restart <gid> re-queues them by hand.

---

Related

• Reference tables: DOC/POS.md → network
• Firewall that may block these: system.md
• Public IP in the daily digest: system.md → health